JTX, 4 Light combo, Black LED Headlights, 4x6, White Halo, Flashes Amber

  
JTX, 2 Pairs, Black LED Headlight COMBO, 4x6, White Halo, Flashes Amber. These are our official JTX 6x4 ADR approved LED lights. This model has black face with a white halo which flashes amber when indicating. The DRL Halo is really bright even in full sun light and it goes all the way around the light - not just up the sides. The DRL Halo will turn off and flash Amber when indicating. 2 Seconds after indicating it will come back on. The light output is amazing. In High Beam mode the low beam is also on - this is a setting within the light to ensure maximum brightness in high beam. They are indestructable and water proof.

They come with all the wiring harness and canbus load modules required for your car. You get ADR certification and according to Qld Dept Transport they are the only ADR approved light. They are made by us here in Melbourne. This is 2 pairs of lights, aimed at being a complete kit for 80 Series Landcruisers.

Our customers give a 12 out of 10 for low beam because it's well beyond their expectations. High beams rivals spot lights and way better than standard high beam.

Each pair of these JTX LED headlights automatically comes with our JTX Toyota wiring harness which solves reverse polarity and negative switching. This makes them a plug and play solution. So to make life easy we just send a harness with every set of these lights. So for one set of lights you get a free JTX Toyota Wiring Harness and a free pair of JTX Canbus Load Modules. One final quirky thing about Toyotas is that the blue dash light and also the spot where people get their high beam trigger for their spotlights runs off a load sensing relay that wants to see a 50w load before it turns on.

Now that your factory wiring is only turning on relays in our wiring kit there is not enough load. You get a pair of our JTX piggy back canbus load module s which each plug into your old outer headlight sockets to trigger that pesky relay and your blue high beam light and spotties will work.

You only need the one pair even if you get 2 sets of lights. Wiring up the Day Running Lights is very easy.

They get their earth through the 3 pin H4 headlight socket. The red wire is to power the primary DRL colour. So wire that to the parkers or to a power source that comes on with the ignition.

The yellow wire powers the secondary colour which is typically amber in which case connect to indicator or to a separate switch if you have a twin colour set up like red and white. JTX LED lights are made by us here in Melbourne. We carry all the components to make up all colour combinations. We make them up and send next day or even same day if we know soon enough. These are 4"x6" rectangular headlights and they fit all 4"x6" rectangular applications such as Toyota Landcruier 80 and late 60-62 series.

Also a lot of trucks and vans have 4x6 lights and they were popular in a lot of cars in the 70's and 80's. They are made to suit Australian left side of road so popular in old cars being brought to Australia and both lights are identical so no left or right side lights. You cant even break them with a hammer.

They have breathers so as to avoid fogging or condensation and we have a breather kit option (just like diff breathers) for the serious off roader likely to do bonnet depth creek crossings. JTX are the preferred light chosen by the off road racing guys.

JTX LED Headlights are ADR compliant and come with a certificate to leave in your glove box. These JTX lights use many of the same components and are of the same build standard of our famous round lights. Those have been out for several years and have proven not only continued popularity but also stood the test of time and not failed and stayed looking sharp even after years in the sun. What's more people are not being booked by police and they are passing roadworthy tests and being engineered etc. Be aware there are plenty of cheaper alternatives out there which simply dont stack up.

Most cheap lights fade or get a weathered yellow appearance after a year or so, they fog or fill up with water and they dont address the negative switching, polarity or blue dash light issues either. Even if the company professes to be Australian they still dont make the lights. Note that LED globes mounted in a conventional light is not ADR and the light must be made for LED built with in its entirity like these. Also lights with a series with rows of LED do not manage low beam well enough to be ADR compliant unlike these that manage low beam perfectly. Other JTX LED Headlight options..

The following 2 lights have no halo at all. Available in either a black face or chrome face. The following lights have Amber as their secondary color. Optionally connect the yellow wire to the indicator on each side and the halo will flash amber with your indicators.

When driving it's only legal to have white or amber facing forwards so the answer to having a car with a red theme and wanting red halo is for the halo to be White (which is legal) and at the flick of a switch it's red for when you want to show it off. But there's no indicator with these. Here are our conventional 4x6 Semi Sealed Lights... Semi Sealed lights take H4 3 pin globes. We offer a huge range of H4 globe options... Halogen - 65/55w, 100/90w, 130/90w and 130/100w.

JTX H4 HID kits - 35w, 55w & 70w. Semi Sealed (normal) but with LED Halo. Our 4x6 Halo lights look and work like normal old headlights. Their crystal reflector manages the light distrubtion really well too.

They are ADR approved and allowed in every state. They have a string of 30 very bright LEDs around the outside. You can make them come on with parkers or could have their own switch inside the car. Popular with the trucks, USA imports and stand out cars. Vertical dispersion ripples in the glass spread the light wide. Smooth glass so no light dispersion - 100% focus forwards, ideal for high beam. 4x6 Combo, Spreads and Spots. Get the full kit for your car. Sealed Beam lights have the globes built inside during manufacture and they are totally sealed.

There is no air or oxygen inside them so they cant rust inside. No water can get in so they are popular with the offroad enthusiast likely to negotiate deep water. Historically this was the original light in a lot of cars and so we sell a lot to people who want to freshen up with the same again.

These are ADR compliant, E stamped and legal in all states. No wiring upgrades required with these. Low and High Beam (40W/60W). 4x6 Inners, High beam only, 55W. Is an Australian family business and have been long time specialists in lighting products for cars, trucks, 4WD's and bikes.

Whether you need to just replace a blown globe, want brighter lights, upgrading spotties with insanely bright HID or out to enhance the look of your ride JTX Lighting can rescue the night. When Steve is not making cool lights he's either building air suspension kits (Air Assist Suspension) for utes and commercial vehicles or running Cliffhanger which is Austrlaia's biggest week long offroad event. Hence his connection with all the offroad guys and them running JTX lights.

And explain your situation and he can give you an expert opinion on what looks good or will work the best. Low and High Beam (55W/60W). Your card details remain safe. Only Pay Pal see your details. We use regular Aus Post or a courier service and we dont charge you for that. When you check out you may upgrade to Aus Post Express (Yellow Bag) which costs just a bit more. All of our stock is here in Australia and ready to send to you straight away. In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will make sure a replacement is sent. If you ordered the wrong size or type then we will swap it over. It's not a problem. All of our items have a. Send the old part back to us for testing and we repair or replace it. We can make sure you send the right part back by asking you to do a few simple tests. For a lot of our products we actually make or assemble them right here in our Melbourne facility so we would have the parts and technical skill to make sure you are totally looked after.

We are based in Melbourne and all of our stock is here in Melbourne. So you will get your goods within a matter of days. The item "JTX, 4 Light combo, Black LED Headlights, 4x6, White Halo, Flashes Amber" is in sale since Wednesday, September 9, 2020.

This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts\Lights, Indicators\Headlights". The seller is "jtxlighting" and is located in Melbourne, Victoria. This item can be shipped worldwide.

1. Manufacturer Part Number: DRL Angel Eye toyota landcruiser 80 series 80s
2. Headlight Style: Halo Projector
3. Housing Colour: Black
4. Placement on Vehicle: Front
5. Brand: JTX
6. Lens Colour: Clear
7. Bulbs Included: Yes
8. Bulb Type: LED
9. Assembly Type: Sealed
10. Bulb Size: H4 (9003)
11. Warranty: 1 Year