JEEP XJ YJ 5 x 7'' 85W PAIR LED DRL Head lights BLACK

  

The Original and Genuine Ultraflex4x4 LED Lights. Throw out those Sealed Beam candle sticks for lights, and get some real sexy mumbo happening! 5 x 7 Lights direct replacement of sealed beam and H4 no mucking around, Plug and Play. The red wire needs to be connected to the blue wire of the parker light on the XJ. You need to change the end to male spade.

And heat shrink the connection or tape. These are built using the same components as the very popular 7 round 105W LED Head lights. These have DRL (White Parker). Yes these are Hi/Lo beam head lamps.

9-16 Volts Not suitable for 24V systems. They have + and - terminals.

There is also a Discovery 1 conversion kit see photos. I was asked to find these lights by a few local 4x4 clubs searching for better lights that are Legal in NSW, VIC and QLD.

After studying ARD46/00 and many exhaustive discussions with Chinese Manufacturing companies over several months I was able to Locate, modify and certify these lights for Australian useage. I only sell things that I have personally used, and others have tested. That's how a 4x4 club works! You can tell the poor quality ones. They have straight led bars not curved, you can see the individual LEDs. They also do not have molded end plugs, and Breathers at the rear. Cleaning is via soft brush and mild soap.

SAE, DOT, and E Mark. ADR 46/00 section 7.8. Listed else where be quick these are the first Legal high Wattage Lights available in Australia. Come with integrated parker / DRL with Female spade connector fitted and a H4 style 3 pin connector. These are HIGH CRI (Colour rendition Index) LEDS.

That means great visibility under all conditions. The LEDs are the same "colour temperature" as a clear sky around Miday.

Face to back they are 70mm. Front Face is 187 x 130 mm.

I'm stoked at these lights so I thought I'd offer them to the general public after all the testing we've done. Weight is 2.5 KG per pair. NOTE: DO NOT block the breathers on these lights. The frontal area is very large and 0.5 PSI is equal to 12 Kgs pushing the front cover off the assembly.

The breathers are there to stop this from happening. The heat generated causes pressure build up inside the light as the air expands. This WILL lead to moisture getting into the lights as the front seal is VERY important.

If you have inadvertently done this then you can remove the front faceia and re-seal with black neutral cure silicone after drying with a hair drier on LOW setting. New stock arriving every week. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Bulbs\Light Bulbs & LEDs". The seller is "ultraflex4x4-com" and is located in this country: AU.

This item can be shipped worldwide.

1. Bulb Colour: 6000K
2. Manufacturer Part Number: UF 5x7\
3. To Fit: Headlight
4. Placement on Vehicle: Front
5. Brand: ULTRFLEX4x4
6. Bulb Size: 85
7. Type: LED
8. Voltage: 10-16